Carbon Shell Research Articles

Acidic Apple Snails: Effects of Climate Change on The Mechanical Properties of An Invasive Gastropod.

Climate change can directly and indirectly affect species distribution. Warming may allow for invasive species, such as apple snails, to migrate to higher latitudes where temperatures are more conducive to their survival and invasion success. Higher temperatures and lower pH ranges have been previously documented to affect the form and function of calcium carbonate shells, which serve many functions including protection from predators and thermoregulation. This study aimed to quantify differences in the morphology and mechanical properties of invasive apple snail, Pomacea maculata, shells after altering temperature and pH. We mechanically tested shells among three five-week treatments: control, higher temperature, lower pH. Ultimate Strength increased in shells that were exposed to higher temperatures, but Young's Modulus and Peak Load did not differ among control, temperature, and pH treatments. Apple snails in higher temperature tanks increased their shell length over the five-week trials, while snails in lower pH tanks decreased their shell length. Although snail morphometrics did not differ between sexes, male shells exhibited a higher Peak Load, Young's Modulus, and Ultimate Strength compared to female shells. Our findings are consistent with previous gastropod studies, in that a lower pH is associated with a decrease in shell size, and higher temperatures yield larger snail shells with a higher Ultimate Strength. Peak Load did not significantly differ among treatments, which suggests that the cross-sectional area is relatively important when considering this species mechanical performance today and in future climates. Due to the intense nutritional and calcium demands of egg production, female snails may be more susceptible to weakened shells due to low pH environments caused by climate change.

Constructing hierarchical MoS2/WS2 heterostructures in dual carbon layer for enhanced sodium ions batteries performance

The escalating global demand for clean energy has spurred substantial interest in sodium-ion batteries (SIBs) as a promising solution for large-scale energy storage systems. However, the insufficient reaction kinetics and considerable volume changes inherent to anode materials present significant hurdles to enhancing the electrochemical performance of SIBs. In this study, hierarchical MoS2/WS2 heterostructures were constructed into dual carbon layers (HC@MoS2/WS2@NC) and assessed their suitability as anodes for SIBs. The internal hard carbon core (HC) and outer nitrogen-doped carbon shell (NC) effectively anchor MoS2/WS2, thereby significantly improving its structural stability. Moreover, the conductive carbon components expedite electron transport during charge–discharge processes. Critically, the intelligently engineered interface between MoS2 and WS2 modulates the interfacial energy barrier and electric field distribution, promoting faster ion transport rates. Capitalizing on these advantageous features, the HC@MoS2/WS2@NC nanocomposite exhibits outstanding electrochemical performance when utilized as an anode in SIBs. Specifically, it delivers a high capacity of 415 mAh/g at a current density of 0.2 A/g after 100 cycles. At a larger current density of 2 A/g, it maintains a commendable capacity of 333 mAh/g even after 1000 cycles. Additionally, when integrated into a full battery configuration with a Na3V2(PO4)3 cathode, the Na3V2(PO4)3//HC@MoS2/WS2@NC full cell delivers a high capacity of 120 mAh/g after 300 cycles at 1 A/g. This work emphasizes the substantial improvement in battery performance that can be attained through the implementation of dual carbon confinement, offering a constructive approach to guide the design and development of next-generation anode materials for SIBs.

Electrospun Core–Shell Carbon Nanofibers as Free-Standing Anode Materials for Sodium-Ion Batteries

Electrospun Core–Shell Carbon Nanofibers as Free-Standing Anode Materials for Sodium-Ion Batteries

Thermal-driven Dispersion of Bismuth Nanoparticles among Carbon Matrix for Efficient Carbon Dioxide Reduction.

The poor electrocatalytic stability and rapid deactivation of metal electrocatalysts are always present in the electrocatalytic conversion of carbon dioxide (CO2) due to the harsh reduction condition. Herein, we demonstrate the controllable dispersion of ultrafine bismuth nanoparticles among the hollow carbon shell (Bi@C-700-4) simply by a thermal-driven diffusion process. The confinement effect of nitrogen-doped carbon matrix is able to low the surface energy of bismuth nanoparticles against the easy aggregation commonly observed for the thermal treatment. On the basis of the synergistic effect and confinement effect between bismuth nanoparticles and carbon matrix, the highly dispersed active sites render the obviously improved electrocatalytic activity and stability for carbon dioxide reduction into formate. The in-situ experimental observation on the reduction process and theoretical calculations reveal that the incorporation of bismuth nanoparticles with nitrogen-doped carbon matrix would promote the activation of CO2 and the easy formation of key intermediate (*OCHO), thus leading the enhanced electrocatalytic activity, with a Faradaic Efficiency (FE) of formate about 94.8% and the long-time stability. Furthermore, the coupling of an anode for 5-hydroxymethylfurfural oxidation reaction (HMFOR) in solar-driven system renders the high 2,5-furandicarboxylic acid (FDCA) yield of 81.2%, presenting the impressive solar-to-fuel conversion.

Self-Encapsulation of High-Entropy Alloy Nanoparticles inside Carbonized Wood for Highly Durable Electrocatalysis.

High-entropy alloy nanoparticles (HEAs) show great potential in emerging electrocatalysis due to their combination and optimization of multiple elements. However, synthesized HEAs often exhibit a weak interface with the conductive substrate, hindering their applications in long-term catalysis and energy conversion. Herein, a highly active and durable electrocatalyst composed of quinary HEAs (PtNiCoFeCu) encapsulated inside the activated carbonized wood (ACW) is reported. The self-encapsulation of HEAs is achieved during Joule heating synthesis (2060 K, 2 s) where HEAs naturally nucleate at the defect sites. In the meantime, HEAs catalyze the deposition of mobile carbon atoms to form a protective few-layer carbon shell during the rapid quenching process, thus remarkably strengthening the interface stability between HEAs and ACW. As a result, the HEAs@ACW shows not only favorable activity with an overpotential of 7mV at 10mA cm-2 for hydrogen evolution but also negligible attenuation during a 500 h stability test, which is superior to most reported electrocatalysts. The design of self-encapsulated HEAs inside ACW provides a critical strategy to enhance both activity and stability, which is also applicable to many other energy conversion technologies.

Thermal‐driven Dispersion of Bismuth Nanoparticles among Carbon Matrix for Efficient Carbon Dioxide Reduction

The poor electrocatalytic stability and rapid deactivation of metal electrocatalysts are always present in the electrocatalytic conversion of carbon dioxide (CO2) due to the harsh reduction condition. Herein, we demonstrate the controllable dispersion of ultrafine bismuth nanoparticles among the hollow carbon shell (Bi@C‐700‐4) simply by a thermal‐driven diffusion process. The confinement effect of nitrogen‐doped carbon matrix is able to low the surface energy of bismuth nanoparticles against the easy aggregation commonly observed for the thermal treatment. On the basis of the synergistic effect and confinement effect between bismuth nanoparticles and carbon matrix, the highly dispersed active sites render the obviously improved electrocatalytic activity and stability for carbon dioxide reduction into formate. The in‐situ experimental observation on the reduction process and theoretical calculations reveal that the incorporation of bismuth nanoparticles with nitrogen‐doped carbon matrix would promote the activation of CO2 and the easy formation of key intermediate (*OCHO), thus leading the enhanced electrocatalytic activity, with a Faradaic Efficiency (FE) of formate about 94.8% and the long‐time stability. Furthermore, the coupling of an anode for 5‐hydroxymethylfurfural oxidation reaction (HMFOR) in solar‐driven system renders the high 2,5‐furandicarboxylic acid (FDCA) yield of 81.2%, presenting the impressive solar‐to‐fuel conversion.

Design of dual carbon encapsulated porous micron silicon composite with compact surface for enhanced reaction kinetics of lithium-ion battery anodes

Developing high-performance composites with fast charging and superior cycle life is paramount for lithium-ion batteries (LIBs). Herein, we synthesized a double-shell carbon-coated porous structure composite with a compact surface (P-Si@rGO@C) using low-cost commercial micron-sized silicon (Si) instead of nanoscale silicon. Results reveal that the unique P-Si@rGO@C features high adaptability to volume expansion, accelerates electron/ion transmission rate, and forms a stable solid electrolyte interphase (SEI) film. This phenomenon arises from the synergistic effect of abundant internal voids and an external double-layer carbon shell with a dense surface. Specifically, the P-Si@rGO@C anode exhibits a high initial coulombic efficiency (ICE) (88.0 %), impressive rate-capability (612.1 mAh/g at 2C), and exceptional long-term cyclability (972.2 mAh/g over 500 cycles at 0.5C). Further kinetic studies elucidate the diffusion-capacitance hybrid energy storage mechanism and reveal an improved Li+ diffusion coefficient (from 3.47 × 10-11 to 2.85 × 10-9 cm2 s-1). Ex-situ characterization confirms the crystal phase change of micron-sized Si and the formation of a stable LiF-rich SEI. Theoretical calculations support these findings by demonstrating an enhancement in the adsorption ability of Si to Li+ (from -0.89 to -0.97 eV) and a reduction in the energy migration barrier (from 0.35 to 0.18 eV). Additionally, practical LixSi powder is shown to increase the ICE of full cells from 67.4 % to 87.9 %. Furthermore, a pouch cell utilizing the prelithiated P-Si@rGO@C anode paired with LiNi1/3Co1/3Mn1/3O2 (NCM111) cathode delivers a high initial reversible capacity of 7.2 mAh and 76.8 % capacity retention after 100 cycles. This work provides insights into the application of commercial silicon-aluminum alloy powder in the anode of high-energy LIBs.

Specific temperature-modulated crab shell-derived porous carbon as a typical recycling material for nitrofurazone electrochemical sensor

Nitrofurazone (NFZ), a nitroimidazole antibiotic, can cause serious toxicity when overused, its quantification is crucial for human health. Herein, crab shell waste is converted into porous biochar at a high temperature, which can be employed for the establishment of an electrochemical sensor for the quantitative detection of NFZ. The morphological and structural properties of the crab shell carbon at different temperatures were characterized by SEM, XRD, FT-IR and N2 adsorption-desorption analyses. The crab shell carbon prepared at 500 °C (C-CS-500) and 700 °C (C-CS-700) is calcite-based and contains micro-fibrillar similar to chitin structure, while the crab shell carbon prepared at 900 °C (C-CS-900) is lime-based and lacks the similar structure. And the synergistic influence of calcite-based composition and micro-fibrillar structure of crab shell carbon offered strong electron-transport properties and a large electrode active at a higher carbonized temperature. The electrochemical signals demonstrated that the crab shell carbon prepared at 700 °C provided enhanced sensing capability for rapid NFZ detection with a wide linear range of 0.40–80 μM, a high sensitivity of 0.55 μA μM−1 and a low detection limit of 0.11 μM (S/N = 3), as compared to the crab shell carbon prepared at 500 °C and 900 °C. In addition, the sensor can also be utilized to quantify nitrofurazone in the real drug (compound cod liver oil ointment) with satisfactory recovery.

Highly Conductive Carbon/Carbon Composites as Advanced Multifunctional Anode Materials for Structural Lithium‐Ion Batteries

AbstractCurrently, structural lithium‐ion batteries (LIBs) typically use carbon fibers (CFs) as multifunctional anode materials to provide both Li+ storage and high mechanical strength. However, due to the obvious volume expansion of CFs in lithiation process, the fiber structure suffers rapid degradation during cycling. Herein, CFs‐reinforced carbon matrix (C/C) composites are proposed as multifunctional anodes for structural LIBs for the first time. The C/C composite presents distinctive core/shell structure, in which CF as the core supplies a fast and continuous electron conduction pathway along with excellent mechanical strength, while the layered pyrolytic carbon shell accommodates the volume change of CF and provides additional ion storage. The impact of the C/C microstructure on the ion/electron transport and the Li+ storage mechanism behind such a unique hybrid structure are explored. Owing to the structural advantages of the C/C composite, the LiFePO4||C/C full cell exhibits surprising electrochemical performances at high electrode mass loadings, which are far superior to those of the present structural LIBs and even surpass the commercial LIBs at the same mass loadings. Moreover, the pouch cell presents excellent mechanical strength and mechanical‐electrochemical coupling characteristics. This work demonstrates great potential of the C/C composites as new multifunctional anodes for high‐performance structural batteries.

SO2-resistant hollow carbon spheres encapsulated Pt nanoparticles for benzene oxidation

In the catalytic combustion of volatile organic compounds (VOCs) using noble metal catalysts, resistance to SO2 poisoning poses a significant challenge. To tackle this problem, Pt nanoparticle catalysts encapsulated in hollow carbon spheres (Pt@HCS catalysts) are synthesized. The Pt@HCS catalyst exhibits excellent benzene conversion, achieving 100 % conversion at 165 °C under an air velocity of 20,000 mL/(g h). Compared to the conventional supported Pt/HCS catalyst, the Pt@HCS catalyst demonstrates a significantly improved resistance to SO2 poisoning. In the presence of 25 ppm SO2, the Pt@HCS catalyst is capable of maintaining a 100 % benzene conversion rate within 24 h, whereas the conversion rate of Pt/HCS drops substantially to approximately 52 %. It is confirmed that the hollow porous structure provided a larger specific surface area and more adsorption sites, thereby facilitating benzene oxidation. More importantly, in situ DRIFTS reveals that the adsorption and desorption processes of SO2, along with the generation of substances like SO32−, are strictly limited to the surface of the carbon shell, thereby preserving the integrity of the internal reaction environment. Multiple characterizations combined with density functional theory (DFT) have demonstrated a unique separation effect over Pt@HCS, whereby the hydroxyl groups on the carbon shell preferentially capture SO2 while allowing benzene molecules to enter the cavities of the catalyst. In this way, any internal ingress of SO2 and competition with benzene for Pt adsorption is effectively avoided. This study offers a potential solution to enhance the performance of noble metal catalysts in the presence of sulfur compounds.

Preparation of nanodiamonds modified hard carbon with uniform spherical feature for improving sodium-ion storage performances

Sodium-ion batteries (SIBs) have received remarkable attention due to their abundant sodium (Na) content and low resources cost. However, the absence of high-performance anode materials make carbon-based SIBs still a challenge. Herein, nano-diamonds (NDs) modified gleditsia japonica shell carbon to form a uniform carbon microsphere, which improves the graphitization degree and Na ion adsorption, NDs also act as a strong scaffold to maintain its stability. This spherical carbon-based material exhibits superior performances including the enhanced capacity (270 mA h g−1 at 0.2C after 100 cycles) and long-cycle stability (155 mA h g−1 at 2C after 1000 cycles) when incorporated into SIBs. This work provides a green and simple synthesis strategy for fabricating high performance porous spherical carbon used for SIBs anode.

Phenolic resin derivatized TiO2-walnut shell carbon hybrid materials for solar photocatalytic phenol removal

Phenolic resin derivatized TiO2-walnut shell carbon hybrid materials for solar photocatalytic phenol removal

Innovative design of silicon-core mesoporous carbon composite for high performance anode material in advanced lithium-ion batteries

Silicon is widely recognized as an exceptionally auspicious anode material for lithium−ion batteries due to its remarkable specific capacity, suitable operational potential, and ecologically innocuous characteristics. This study presents a novel silicon@void@FC (fibrous carbon) composite anode material for lithium-ion batteries. Utilizing a one-step synthesis approach, the resulting hollow core–shell structure, combined with a mesoporous carbon shell, demonstrates exceptional electrochemical performance. The Si@Void@FC electrode exhibits remarkable cycle stability and rate performance, maintaining structural integrity over 500 cycles without observable degradation. The outer carbon shell acts as a protective layer and accommodates silicon volume expansion during cycling, preventing excessive contact with the electrolyte. The rich mesoporous structure facilitates efficient lithium-ion diffusion, enhancing lithiation and delithiation processes. The simplified one-step synthesis method further streamlines the preparation process, eliminating the need for complete silica template formation. This innovative Si@Void@FC composite material holds promise for advancing lithium-ion battery technology, addressing challenges associated with silicon-based anode materials, and offering insights into the design and synthesis of high-performance energy storage materials.

Deciphering multistep transformation mechanism of cobalt-vanadium bimetallic sulfides anode in sodium storage

Transition metal sulfides as a high specific capacity sodium-ion batteries (SIBs) anode which have been suffering from successive phase transitions bringing about stress changes, poor electronic conductivity and ineffective ion transport kinetics. Combining self-sacrificial templates and ion-exchange transition reaction mechanisms, herein, cobalt, vanadium bimetallic sulfides hollow nano-cubic boxes with nitrogen-doped nanocarbon coating layer (CoV2S4@NC) are designed to solve these symbiosis problems. With a combination of in-situ Raman, ex-situ XPS/TEM, and density-functional theory calculations, the synergistically coordination mechanism between cobalt and vanadium binary metal during multi-step conversion processes is responsible for the faster charge transfer kinetics and boosted Na+ pseudocapacitance storage capability. Furthermore, the hollow cubic structure combined with the carbon shell layer can release the internal stress during phase transitions and avoid the recurrent growth of SEI film by volume change during the electrochemical process, thus realizing a superior electrode/electrolyte interface. Thus, when used as anode materials for SIBs, the prepared anode materials display excellent electrochemical performance, delivering capacity of 492 mA h g−1 at a current density of 10 A g−1 and high capacity stability with 484 mAh g−1 after 1000 cycles at 5 A g−1. More importantly, the assembled full cell (Na3V2(PO4)3//CoV2S4@NC) also shows high capacity of 574 mAh g−1 with 94.7% capacity retention after 85 cycles, suggesting the potential application of bimetallic sulfides in SIBs.

Self-Powered Water Splitting of Ni3FeN@Fe24N10 Bifunctional Catalyst Improved Catalytic Activity and Durability by Forming Fe24N10 on Catalyst Surface via the Kirkendall Effect.

Highly efficient water splitting electrocatalyst for producing hydrogen as a renewable energy source offers potential to achieve net-zero. However, it has significant challenges in using transition metal electrocatalysts as alternatives to noble metals due to their low efficiency and durability, furthermore, the reliance on electricity generation for electrocatalysts from fossil fuels leads to unavoidable carbon emissions. Here, a highly efficient self-powered water splitting system integrated is designed with triboelectric nanogenerator (TENG) and Ni3FeN@Fe24N10 catalyst with improved catalytic activity and durability. First, the durability of the Ni3FeN catalyst is improved by forming N, P carbon shell using melamine, polyetherimide, and phytic acid. The catalyst activity is improved by generating Fe24N10 in the carbon shell through the Kirkendall effect. The synthesized Ni3FeN@Fe24N10 catalyst exhibited excellent bifunctional catalytic activity (ηOER = 261.8 mV and ηHER = 151.8 mV) and remarkable stability (91.7% in OER and 90.5% in HER) in 1 m KOH. Furthermore, to achieve ecofriendly electricity generation, a rotation-mode TENG that sustainably generate high-performance is realized using butylated melamine formaldehyde. As a result, H2 is successfully generated using the integrated system composed of the designed TENG and catalyst. The finding provides a promising approach for energy generation to achieve net-zero.

Unveiling the formic acid dehydrogenation dynamics steered by Strength-Controllable internal electric field from barium titanate

Formic acid is a desirable liquid hydrogen storage compound for solving transport and storage problems of hydrogen for onboard fuel cells. Optimizing adsorption/desorption energy of intermediates can directly modulate the performance of Pd catalysts in formic acid dehydrogenation (FAD). Herein, we introduce internal electric field with controllable strength to regulate the adsorption/desorption of intermediates on Pd. Non-ferroelectric cubic-phase barium titanate (CBT) is heat-treated at high temperature to obtain ferroelectric tetragonal-phase barium titanate (TBT(C)), which exhibits internal electric field. The strength of the internal electric field is successfully adjusted by heat treatment at different temperatures. The size of Pd nanoparticles is restricted between 2.2 and 2.7 nm, and the electronic effect of Pd is effectively eliminated by coating TBT(C) with mesoporous carbon shell (TBT(C)@SC). Experimental results prove that the internal electric field promotes the desorption of hydrogen on Pd. Pd/TBT(C)@SC-800 obtained by heat treatment at 800 °C, with the optimal internal electric field strength, exhibits high activity and hydrogen selectivity for FAD. This work provides a new strategy for designing FAD catalysts.

Fluorine-doped porous carbon coating on Sn/SnOx as anode materials for high-performance potassium ion batteries

Potassium-ion batteries (PIBs) are considered alternatives to lithium-ion batteries because of their comparatively cheaper manufacturing costs and lower potential (2.936 V compared to standard hydrogen electrodes). However, their large ionic radii and unstable structures hindered their satisfactory electrochemical performance. In this study, F–Sn/SnOx@C, a novel porous layered composite material, was prepared using NaCl as a template for in situ etching to obtain a promising negative electrode material for PIBs. The significant specific surface area of the composite material and the uniform embedding of tin nanoparticles within the layered porous carbon shell, contributed to its excellent potassium intercalation/deintercalation performance. Fluorine doping enhanced electron transfer, prevented nanoparticle aggregation, and improved electrolyte penetration and potassium ion migration. The PIBs prepared from this electrode showed high potassium storage capacity, outstanding cycle stability (retaining 263 mAh g−1 after 200 cycles at 100 mA g−1), and remarkable rate capability (505.6, 288.4, 193.5, 134.1, and 83.3 mAh g−1 at 0.1, 0.2, 0.3, 0.5, and 1.0 A g−1, respectively). These results provide a straightforward solution for improving the electrochemical performance of PIBs.

In-situ synthesis of encapsulated N-doped carbon metal oxide nanostructures for Zn-air battery applications

La, Mn and Co-based materials with diverse compositions encapsulated in N-doped carbon materials were synthesized by an in-situ sol-gel method. The as-prepared materials were physically activated with CO2 giving as a result composites with excellent performance for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). The composites were characterized by different physicochemical techniques revealing the importance of porosity created by CO2 activation. This crucial step increases the number of accessible active sites such as Co-Nx-C sites, Co/MnO heterointerfaces and graphitic N groups. Moreover, the formation of La2O2CO3 was detected to enhance electrical conductivity and electrochemical performance and it is active for ORR. Although the composite containing La, Mn and Co has less concentration of the highly active sites, its small particle size favour a better distribution of these sites. The Co-containing composites were tested as air-electrodes in a Zn-air battery and compared to commercial electrocatalysts. All composites showed a better operation in terms of higher cyclability and higher energy density which is a consequence of metal nanostructures encapsulation in N-doped porous carbon shells. Interestingly, the pure Co-based composite showed an outstanding performance related to the high concentration of the Co-Nx-C active sites that provide high activity and stability.

Porous carbon-coated silicon composites for high performance lithium-ion batterie anode

With the rapid development of silicon-based lithium-ion battery anode, the commercialization process highlights the importance of low-cost and short-flowproduction processes. The porous carbon/silicon composites (C/Si) are prepared by one-step calcination using zinc citrate and nano-silicon as the primary raw materials at a temperature of 950 °C. In this composite, silicon nanoparticles are coated with a porous carbon shell with an average pore diameter of 4.49nm, which improves the structural stability and electrochemical performance of the anode. Density-functional theory calculations show that the porous carbon enhances the electrical conductivity, facilitates the interlayer migration of Li-ion, and strengthens the gain effect of stress on conductivity. Additionally, stress further reduces the diffusion barriers of Li-ion. The porous C/Si anode demonstrates outstanding specific capacity and rate capability, maintaining a stable specific capacity of 1170 mAh/g at a current density of 0.2 A g−1 after 100 cycles and retaining a reversible specific capacity of 944 mAh/g even at a charging current density of 2 A g−1. The carbon/silicon anode materials prepared using this strategy present a streamlined manufacturing process and exceptional performance, as well as avoiding the post-washing step, providing a pathway toward the scalable application of silicon-based anodes.

Graphene aerogel encapsulated double carbon shell CoFe@C@C nanocubes for construction of high performance microwave absorbing materials

Recently, Prussian blue analogs (PBAs) have attracted much attention due to their transformation into dielectric/magnetic coupled composites after pyrolysis at high temperatures and their ability to maintain their basic morphology. However, designing efficient microwave-absorbing materials using PBAs is still a challenge. In this work, Co–Fe PBA was prepared by wet chemical method and graphene aerogel-encapsulated double carbon-shell CoFe@C@C nanocubes (CFCCG) were prepared by stirred self-polymerization and hydrothermal method, and heat-treated at different temperatures to obtain composites consisting of core-shell-structured PBA-derived particles encapsulated in a double layer of graphene and polydopamine (PDA). The addition of graphene not only reduces the density of the derived material but also effectively disperses the CoFe@C@C nanocubes to prevent the generated highly conductive carbon layer from adhering to improve the impedance matching, as well as introduces a large number of heterogeneous interfaces to improve the loss capability. Thanks to which the CFCCG7 composites have a reflection loss of −66.33 dB and an effective microwave absorption frequency covering the entire Ku-band. This work provides a new approach for rational design of multilayer carbon structure-coated PBA-based microwave absorbing materials.